The Double Dinger is available to suit 40mm and 50mm bath installations, as well as 80mm to suit showers.
May be installed in a vertical or horizontal connection.
The easy way to solve plumbing misalignment problems!
The Extendable Plumbdinger is supplied with 2 elbows and a sleek chrome plated brass pop up plug and is intended for use when combined with rigid 40mm DWV pipe for situations where offsets vary.
EXTENDABLE PLUMBDINGER with Standard Waste (CODE XTP-40)
EXTENDABLE PLUMBDINGER with Pop Up Waste Chrome Plated not available in Black (CODE XTP-40PUP)
1The Flexible Plumbdinger is ideal for accommodating varing angles and gradients where space below spas and baths is limited. Supplied with a flexible tube that is designed to allow movement of the spa or bath when subjected to large volumes of water. The flexible tube is suitable for solvent welding and is supplied as part of Flexible Plumbdinger. The FPD-40PUP is supplied with a sleek chrome plated brass pop up plug. Maximum offset 350mm centre to centre. Available in longer lenghts.
FLEXIBLE PLUMBDINGER with Standard Waste (CODE FPD-40)
FLEXIBLE PLUMBDINGER with Pop Up Waste Note Waste is Chrome Plated not available in Black (CODE FPD-40PUP)
The LINEAL BOTTLE TRAP is designed to fit to the basin first, then lowered into a 40mm diameter DWV pipe, once the pipe has been set to height and internally chamfered and lubricated. This will save time and hassle on one-man easy installation. The inlet is offset to allow for connection to basins with a tight pedestal.
Features:
For Basin Installation
To Open Trap
Twist to open using a screw driver as a lever
To Reassemble Trap
For Bidet Installation
Manufactured from ABS plastic, fully tested by an independent laboratory is safe to use for all drainage access openings. Fully watermark licensed to AS 2887 - Plastic Waste Fittings. The M.I. Bolted Trap Screw Inspection Opening can be used instead of cumbersome bolted trap screws and will withstand all pedestrian and vehicular traffic areas.
FULLY LICENSED TO THE APPROPRIATE AUSTRALIAN STANDARD
The advantage of the Inspection Opening is in its unique web design which makes it strong enough to withstand the heaviest of vehicular traffic and yet still remain small, light and easy to install, fitting inside 100mm pipe with the mandatory 50mm pipe engagement.
SAVES THE PLUMBER TIME
The M.I. Bolted Trap Screw Inspection Opening is also timesaving for the installing plumber. It prevents the need for a site visit prior to concrete being poured as no setup is required.The plumber can simply instruct the concreter or tiler to work right up to the pipe and the I.O. is neatly installed inside the pipe later.
EASY OPENING
The key way has been especially designed to suit most angle grinder keys (no special tool required, just what you’ve already got in your tool box) The white is attractive and ideal for tiled areas and the grey for concrete pathways and driveways etc., it simply blends in. Our Stainless Steel (316 marine Grade) is ideal for food preparation areas and medical suites.
OTHER USES
Other uses for the Inspection Opening is as stop-ends for pipe fixed to vehicles for carrying fishing rods, conduit, water etc. It also makes a child proof cover for pest control bait traps for white ant treatment.
Replace old cracked plastic inspection openings quickly and easily with the Wizard I.O. as it slips right into the 100mm pipe.
The Plumbdinger is available to suit 40mm bath installations, as well as 80mm to suit showers.
Offering 360 degree rotation, up to 150mm offset and up to 50mm height adjustment.
The easy way to solve plumbing misalignment problems!
The Plumbdinger is available to suit 40mm bath installations, as well as 80mm to suit showers.
Offering 360 degree rotation, up to 150mm offset and up to 50mm height adjustment.
The easy way to solve plumbing misalignment problems!
(CODE V75DF or No Overflows V75DFK)
